Canon imagerunner 2202 Copy problem

[JPiek]

Re: Canon imagerunner 2202 Copy problem

The first time - copy an 50 copies and there is no problem, the second and third time again no problem. Fourth time I copy again 50 copies and there is problem. This is not every time. The scannerrails is lubricated and scannerdrivebelt is OK

Ok, so you scan 1 original, copy it 50 times, it's ok
you scan another (or the same) original and copy it 50 times, it's ok.
you scan another (or the same) original and copy it 50 times, it's ok.

only the 4th time you scan an original it comes out blurred... ?
Do all 50 copy's of the 4th scan come out blurred ?

yes -> 4th scan is not ok -> problem in scanner
no -> problem printing after appox. 150-200 sheets -> problem in printer

[Nikola Karamanov]

Re: Canon imagerunner 2202 Copy problem

Thanks for replay.Yes - all 50 copies are blurred. Generated something like vibration when the scanner moves, the scanner motor cost 300 $ and I am not completely sure its from him. I was tried almost everything like i said before. thanks again!

[JPiek]

Re: Canon imagerunner 2202 Copy problem

It only seems to ahppen after multiple scans, how much time inbetween the scans ? And howlong before you can scan normaly again ? Trying to figure out if it might be heat or something like that,...