[Jamming] Canon 8085

[TFitz]

I have 10 Canon 8085's in the field, and I have been having a problem with feeding out of tray 1 & 2, mainly tray 2. Most of the machines are fine but I have 3 machines that will not pull out of tray 2 and show a jam for the error. We have replaced boards, feed units, sensors and motors and it still is not working. We now also have one machine with both tray 1 & 2 doing the same thing, please help! The Jam codes per the tech that was on site are 0101 for tray 1 and 0106 for tray 2, thanks.

[zoraldinho]

Re: Canon 8085

jam for the error. Jam code please!

[dan7777]

Re: Canon 8085

I have 10 Canon 8085's in the field, and I have been having a problem with feeding out of tray 1 & 2, mainly tray 2. Most of the machines are fine but I have 3 machines that will not pull out of tray 2 and show a jam for the error. We have replaced boards, feed units, sensors and motors and it still is not working. We now also have one machine with both tray 1 & 2 doing the same thing, please help!

There is a feed motor behind tray 2 (back of machine). Paper feeds into rollers and looks like a flat sep roller problem. Sometimes you have to replace tray 1 assembly and the feed motor (back of machine). If you don't post jam codes here no one can help. Keep new rollers in, sometimes they only get 40% before you get more jams. Keep software up to date.

[TFitz]

Re: Canon 8085

Thanks for the posts the Jam codes are 0101 for tray 1 and 0106 for tray 2. We have replaced the feed assembly, feed tires and feed motor, thanks.

[20 year tech]

Re: Canon 8085

check that the deck pressure plate is in the right position, it may been missed during set up.


paper deck.pdf