Ir5000 Oldie But A Goodie. HELP PLEASE

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • The clk man
    Technician

    50+ Posts
    • Apr 2010
    • 86
    #1

    Ir5000 Oldie But A Goodie. HELP PLEASE

    my canon's have been running great for years. I am in need if help. I put a new ADF separator pad in the ir5000 and put everything back together and there no power to the adf, there is a metal lever that if you push it, the feed wheels go up and down. PLEASE HELP me. the wife and I have a big job to do today, about 4500 originals complete with having to pull staple out and everything. Thanks in advance. Also, when you take the adf cover of on the non operator side there is a red light blinking on the circuit board. HELP PLEASE, I will give whoever helps me a Dollar.
    Tags: None
    • The clk man
      Technician

      50+ Posts
      • Apr 2010
      • 86
      #2
      Re: Ir5000 Oldie But A Goodie. HELP PLEASE

      Also there is no codes, just the blinking red light on the adf circuit board.

        Comment

        • CT Copier Repair
          Trusted Tech

          250+ Posts
          • Mar 2010
          • 304
          #3
          Re: Ir5000 Oldie But A Goodie. HELP PLEASE

          Originally posted by The clk man
          Also there is no codes, just the blinking red light on the adf circuit board.
          sounds like something isnt'plugged in fully
          go back and recheck your work
          basically if you disconnected stuff and it doesn't work after you didn't get it reconnected

          Or you blew up a board

          Hope you had powered down machine and unplugged before working on it

            Comment

            • The clk man
              Technician

              50+ Posts
              • Apr 2010
              • 86
              #4
              Re: Ir5000 Oldie But A Goodie. HELP PLEASE

              Originally posted by CT Copier Repair
              sounds like something isnt'plugged in fully
              go back and recheck your work
              basically if you disconnected stuff and it doesn't work after you didn't get it reconnected

              Or you blew up a board

              Hope you had powered down machine and unplugged before working on it
              That was exactly the problem. I have a CE000003-000 fuser code, the machine cuts off before I can get in service mode. I thought maybe the fuser over heated because we have been running it all day for 2 days now. Any thoughts on this problem? Thanks you sir for your help.

                Comment

                • Hopper
                  Trusted Tech
                  • Jul 2008
                  • 173
                  #5
                  Re: Ir5000 Oldie But A Goodie. HELP PLEASE

                  Originally posted by The clk man
                  That was exactly the problem. I have a CE000003-000 fuser code, the machine cuts off before I can get in service mode. I thought maybe the fuser over heated because we have been running it all day for 2 days now. Any thoughts on this problem? Thanks you sir for your help.
                  Keep the front doors open when you reboot. SB able to get into service mode before it clicks out. Rest fuser code under function/clear/ERR/OK.

                    Comment

                    Previous template Next
                    Working...