If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have an E585 in my general book.
It relates to 'The shutter HP sensor is not turned ON within a specific time as the paddle motor is in operation' it is related to Stacker2
Also i have E584 - 8001 =
Stack ejection motor
(M102)/Shutter open/
close clutch (CL101)/
Shutter home position
sensor (PI113)
The stapler does not leave the shutter home position
when the stack ejection motor has been driven for 3
seconds.
I have an E585 in my general book.
It relates to 'The shutter HP sensor is not turned ON within a specific time as the paddle motor is in operation' it is related to Stacker2
Also i have E584 - 8001 =
Stack ejection motor
(M102)/Shutter open/
close clutch (CL101)/
Shutter home position
sensor (PI113)
The stapler does not leave the shutter home position
when the stack ejection motor has been driven for 3
seconds.
=================================
yea seen the e584
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment