[Jamming] IR 3245 RANDOM PAPER JAMS and WRINKLE at fixing assembly

[browny]

HELLO ALL
We have canon IR 3245 :JAMS ( SOME TIME ) at the fixing assembly : WRINKLE THERE , replaced new fixing assembly ,new drum ,still not fix ... observed the copiers ,prints come out to finisher have : papers bending at the center of each page ( all pages : 8.1/2 -11). Please help .THANK YOU ALL.

[zoraldinho]

Re: IR 3245 RANDOM PAPER JAMS and WRINKLE at fixing assembly

Probably delivery flapper doesn't move smoothly (sticking).Also try with fixing speed. (COPIER>ADJUST>FIXING>FX-FL-SP) set to 3
Bushing condition?

[browny]

Re: IR 3245 RANDOM PAPER JAMS and WRINKLE at fixing assembly

Thank you very much ZORALDINHO . Problems fixed...it is running very good , NO MORE WRNKLE .

[zoraldinho]

Re: IR 3245 RANDOM PAPER JAMS and WRINKLE at fixing assembly

Thank you very much ZORALDINHO . Problems fixed...it is running very good , NO MORE WRNKLE .

No problem. What was wrong?

[browny]

Re: IR 3245 RANDOM PAPER JAMS and WRINKLE at fixing assembly

HELLO ALL :
IR 3245 : WRINKLE AND JAMS AGAIN. IN FUSER : new DRUM & FUSER ( brand new from CANON ) the same problem ) ... Just ran 2days then problem coming back ... NEEDS HELP. THANK YOU ALL

[browny]

Re: IR 3245 RANDOM PAPER JAMS and WRINKLE at fixing assembly

Probably delivery flapper doesn't move smoothly (sticking).Also try with fixing speed. (COPIER>ADJUST>FIXING>FX-FL-SP) set to 3
Bushing condition?

Thanh you for reply , i did increase speed to 3 ,did not work