The machine cannot be accessed from the network and displays error message 'Default key corrupted'. What can be wrong and what is the solution? Please help!
-
-
1 - Additional functions -> system settings -> network settings -> TCP/IP settings -> certificate settings.
2 - Generate Key.
3 - Key Name -> use any name like 1234, ABCD, etc.
4 - Select 1024 as the key length.
5 - Enter the current date as the start date.
6 - Enter an end date with current month and date and the year ending with 2025.
7 - Start key generation.
8 - Go to certificate settings and select -> Key and Certificate List.
9 - Highlight the default key and press erase.
10 - Exit out and restart the copier. -
Hi,
Get into service mode level 2.Go to funtion,clear ca-key,enter.Power cycle ie switch on/off.It should be ok,Comment
-
Thank you all, i tried the first suggestion and it worked straight away. I'll try the other as a matter of interest.
Regards!Comment
Comment