[Misc] Canon CLC 5151

[linirob]

Hi, hope some one can help.
Printing SRA3 sheet, 250gsm through stack by pass. Printing from Fiery.

1st sheet prints fine, 2nd 3rd and onwards, magenta is out of reg.
If I put a perfect sheet on the scan glass reg is perfect.


Have new Magenta drum and toners. Cleaned sensors for colour above ITB
Have checked various sites which tell me to go to service, adjustment/maintenance Adjust image quality auto correct colour mismatch
Just cannot find these.
I can get into to service but no help.

Desperate for help Please.
Lini

[Tricky]

Re: Canon CLC 5151

I dont think these machines have "auto colour mismatch" colour registration is performed at startup.

Is registration out when printing from the cassettes?

[rayaeek]

Re: Canon CLC 5151

Registration or DCON clear could solve problem. Please do p-print beforehand.

Sent from my SM-G901F using Tapatalk

[linirob]

Re: Canon CLC 5151

Registration or DCON clear could solve problem. Please do p-print beforehand.

Sent from my SM-G901F using Tapatalk

Thank you so much I will try DCON, cannot find registration.
Sorry to be a bit dumb but what is p-print.

Thank You,
Lin

[linirob]

Re: Canon CLC 5151

I dont think these machines have "auto colour mismatch" colour registration is performed at startup.

Is registration out when printing from the cassettes?

Thank you for replying, cassettes seem o.k.

Thank You, Lini

[rayaeek]

Re: Canon CLC 5151

Registration clear in Level 2 Svc mode

Sent from my SM-G901F using Tapatalk

[rayaeek]

Re: Canon CLC 5151

Registration clear should be the first option

Sent from my SM-G901F using Tapatalk

[linirob]

Re: Canon CLC 5151

Registration clear should be the first option

Sent from my SM-G901F using Tapatalk

Will try tomorrow.

Thank you all for your help
lini

[linirob]

Re: Canon CLC 5151

[QUOTE=linirob;517578]Will try tomorrow.

Thank you all for your help
Tried it all but still same.
If I tell it plain (64gsm etc ) it's fine, so am at a loss

Lini