[Error Code] Canon IR1600

[Ibrahimba]

IR1600 - error E100. I replaced DRUM UNIT or error remained. How to solve this problem?

[laitang]

Re: Canon IR1600

1) Drum unit:
Is the drum unit installed in host machine?
NO : Install the drum unit.
2) Connection:
Is the connection of the connector (J908) on the BD detection PCB, connector (J907) of the laser unit, and connector (J102) on the DC controller PCB normal?
NO : Correct the connection.
3) Laser/scanner unit, DC controller PCB:
Try replacing the laser/scanner unit. Is the fault corrected?
YES : End.
NO : Replace the DC controller PCB.

[techandtrader]

Re: Canon IR1600

Common problem that the tab on the drum breaks off on the back side. Then shutter doesnt open on laser. Then laser error.