irc 5035 no network display

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pontiac
    Trusted Tech
    • Apr 2008
    • 420
    #1

    irc 5035 no network display

    Network is missing from Preferences display to setup network.. Any ideas thanks.
    Tags: None
    • techandtrader
      Trusted Tech

      Site Contributor
      250+ Posts
      • Jun 2016
      • 318
      #2
      Re: irc 5035 no network display

      You have to turn it on. I am not near one so cant say for sure. Should be top side of screen.
      I have used Canon Imagerunner parts for sale. Most are floor model Color and / Advances Imagerunner with some 3025 3235 parts. Several intact machines being parted.

        Comment

        • charm5496
          Service Manager

          Site Contributor
          1,000+ Posts
          • Apr 2008
          • 2387
          #3
          Re: irc 5035 no network display

          settings/registration - network - confirm network config to 'ON'
          Then you can set to DHCP or static address
          Accidents don't just happen. They must be carelessly planned.

            Comment

            • roho
              Senior Tech

              500+ Posts
              • Mar 2009
              • 844
              #4
              Re: irc 5035 no network display

              If the device was configured for a fiery, then the network options won't be under preferences. Check service mode 1, copier>option>int face: should be set to zero, reboot.

                Comment

                • madas
                  Trusted Tech

                  250+ Posts
                  • Aug 2008
                  • 313
                  #5
                  Re: irc 5035 no network display

                  Originally posted by roho
                  If the device was configured for a fiery, then the network options won't be under preferences. Check service mode 1, copier>option>int face: should be set to zero, reboot.
                  Agree I had to do one the other day never knew that until I asked Canon tech, live n learn good post mate.

                  Les

                    Comment

                    Previous template Next
                    Working...