Hi had to remove an internal finisher from a IRC2020 and once removed worked perfectly apart from full auto gradation. The machine displayer a message "Adjustment was stopped try again".
With no attempt to feed paper.
Auto colour mismatch and quick autograd worked so it was not the pattern reader, out of desperation I fitted the internal finisher and it did full auto grad.
Turns out someone had activated >copier>option>acc> intray
With no attempt to feed paper.
Auto colour mismatch and quick autograd worked so it was not the pattern reader, out of desperation I fitted the internal finisher and it did full auto grad.
Turns out someone had activated >copier>option>acc> intray
Comment