Assistance Scanning Using Canon IR C3200

[teckat]

Re: Assistance Scanning Using Canon IR C3200

Yes - I can print.

The Ethernet cable runs from my router to the Ethernet port on the Fiery.

I added the the printer through Windows with no problem. The ScanGear tool program also sees the Canon on the network (192.168.1.250).

One additional fact that I don't know whether it's relevant. In order to print (and not get the error message about the fan being defective), I always must boot up the Fiery first and then turn on the copier.

________

At the Control Panel, press [Printer] tab. Press [Printer Status/Settings].

U may need to scroll over to see Printer Tab,
Look at upper right corner on main screen of control panel, u should see a arrow -->, press to scroll and view next Tabs.

There u will see Printer_ under that is where u input Network settings when an immagePASS is connected.

??? are u a tech or keyop _?