Noise in image press C800

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • khattab.al.masry
    Trusted Tech
    • Jan 2014
    • 212

    #1

    [Misc] Noise in image press C800

    Dears all:
    during maintain image press c800 i heard noise i have investigate to locate source of this noise but i can not reach to it
    i tried to check the available motor as described in service manual also there is no way to reach the source of noise.
    Thanks in advance.
  • khattab.al.masry
    Trusted Tech
    • Jan 2014
    • 212

    #2
    Re: Noise in image press C800

    ANY HELP FRIENDS PLEASE.

    Comment

    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387

      #3
      Re: Noise in image press C800

      so you want help troubleshooting a noise over the internet, but have supplied us very little to assist you with the question you have asked.
      Do you have a service manual for the device?
      Have you run the different motor checks to narrow down the source of the noise and then referenced the service manual on how to disassemble the area where the noise is coming from?

      We are pretty good at what we do, but we cannot see or hear what is going on with the machine you are working on...sorry
      Accidents don't just happen. They must be carelessly planned.

      Comment

      • khattab.al.masry
        Trusted Tech
        • Jan 2014
        • 212

        #4
        Re: Noise in image press C800

        After research i found the following attachment which i hope to be helpful for us
        thank you.
        Attached Files

        Comment

        Working...