Service mode imageprograf pro 4000S?

[alexctx]

enter service mode imageprograf pro 4000S?images (17).jpg

[kbrx]

Re: Service mode imageprograf pro 4000S?

up

Anyone know?

[fiteh2010]

Re: Service mode imageprograf pro 4000S?

1. Press and hold the Power button while touching Area4 (lower left) of the operation panel. (DO NOT release the buttons.)
2. When the Canon logo is displayed on the operation panel, release the finger touching Area4 (lower left) while holding the Power button, touch in order of Area2 (lower right,) Area3 (upper left,) and Area1 (upperright) of the operation panel, release the finger from Area1 (upper right) and finally release the Powerbutton within two seconds.
3. When the service mode is successfully launched, the orange lamp blinks above the operation panel afterthe home screen is displayed.

br,
jac

[bask]

Re: Service mode imageprograf pro 4000S?

1. Press and hold the Power button while touching Area4 (lower left) of the operation panel. (DO NOT release the buttons.)
2. When the Canon logo is displayed on the operation panel, release the finger touching Area4 (lower left) while holding the Power button, touch in order of Area2 (lower right,) Area3 (upper left,) and Area1 (upperright) of the operation panel, release the finger from Area1 (upper right) and finally release the Powerbutton within two seconds.
3. When the service mode is successfully launched, the orange lamp blinks above the operation panel afterthe home screen is displayed.

br,
jac

Olmadı