Error code E025-0102 on iPC1+

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ingranaggio_rotto
    Trusted Tech

    250+ Posts
    • Oct 2010
    • 275
    #1

    Error code E025-0102 on iPC1+

    Hi to everybody !
    I have this error code on iPC1+ : E025-0102.
    I have cleaned the pipes of yellow toner. I have verified sensors and motors about yellow hopper. The values about the signals are correct.....


    Suggestions ?



    Tags: None
    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387
      #2
      Re: Error code E025-0102 on iPC1+

      there was a post about cutting wire ties to the sensor from the controller and then checking for pinched and broken wires
      Accidents don't just happen. They must be carelessly planned.

        Comment

        • Ingranaggio_rotto
          Trusted Tech

          250+ Posts
          • Oct 2010
          • 275
          #3
          Re: Error code E025-0102 on iPC1+

          I've done it but I did not have the resolution of the problem ....

            Comment

            • khattab.al.masry
              Trusted Tech
              • Jan 2014
              • 212
              #4
              Re: Error code E025-0102 on iPC1+

              Originally posted by Ingranaggio_rotto
              I've done it but I did not have the resolution of the problem ....
              The following attached file is useful.
              Attached Files

                Comment

                Previous template Next
                Working...