[Electrical] key counter or coin vendor connector

[ferastec]

Hi guys, I need to know the key counter or coin vendor in canon IR7105.
how the connector looks like and the wiring diagram.
number of the connector should be inscribed on the connector.
And which PINs are interconnect , when the panel unlocked

[Hopper]

Re: key counter or coin vendor connector

Hi guys, I need to know the key counter or coin vendor in canon IR7105.
how the connector looks like and the wiring diagram.
number of the connector should be inscribed on the connector.
And which PINs are interconnect , when the panel unlocked

I have done a number of these. You need to fin out the coin machine color code. With Canon it is usually a 4 pin connector. Two pins are enable and two pins are click. The enable brings the copier to a ready state (when they put coins in there) and click increaments the count of copies being made (just like the counter on the copier). When you open the control panel to get to the connector the will be a 4 pin connector with a jumper wire. The jumper will be the wires for enable. Normally on the large Canons it is on the right side of the control panel. What make is the coin box?