[Jamming] Canon 7260 0101 Jams from right deck 1

[tekkie]

I have a Canon 7260 with 0101 Pick up jams from Deck 1 right hand deck only.
The paper has failed to pick up at ball its very intermittent but consistent.
I have replaced the whole paper pick up assembly and swapped the black sensor assembly with the deck level sensor and levers etc thats at the back of the mc where the deck pushes into with tray 2.Still jamming.
Any pointers much appreciated please

[dan7777]

Re: Canon 7260 0101 Jams from right deck 1

I have a Canon 7260 with 0101 Pick up jams from Deck 1 right hand deck only.
The paper has failed to pick up at ball its very intermittent but consistent.
I have replaced the whole paper pick up assembly and swapped the black sensor assembly with the deck level sensor and levers etc thats at the back of the mc where the deck pushes into with tray 2.Still jamming.
Any pointers much appreciated please

I had one with jamming from bottom drawers and the lower right door hinges were bent. I straightened them out and it was ok. Push on the door and see if it quits jamming. If it jams a lot they may be opening the door too much bending the hinges.