[Misc] Colour Mismatch - Canon imageCLASS MF8580Cdw

[Guest]

The "red" color shift out of it's position horizontally(like 2mm) while color printing, "Correct Print Colour Mismatch" under Adjustment/Maintenance result "Correction fail" after like 1 min, this problem appear suddenly this morning, before that, I did nothing between the last fine printing.

What I had tried:
Replace a new red toner - no luck
Factory reset (service mode: copier -> function -> clear -> all) - no luck

ps: All of my 4 toner is low, of coz , not for red after I replace a new one, will it be the problem? (but the other toner are still workable)

Thanks and welcome for helps

[teckat]

Re: Colour Mismatch - Canon imageCLASS MF8580Cdw

1. Press and tap <Menu>.
2. Tap <Adjustment/ Maintenance>.
3. Tap <Correct Print Color Mismatch>.
4. Tap <Start>. Adjustment starts.

MF8580------e-Manual

https://www.usa.canon.com/internet/portal/us/home/support/details/printers/color-laser/mf8580cdw/color-imageclass-mf8580cdw#boxcontents_supporttab_tab

https://www.manualslib.com/manual/891317/Canon-Mf8580cdw.html?page=604

[rubbishjason]

Re: Colour Mismatch - Canon imageCLASS MF8580Cdw

1. Press and tap <Menu>.
2. Tap <Adjustment/ Maintenance>.
3. Tap <Correct Print Color Mismatch>.
4. Tap <Start>. Adjustment starts.

MF8580------e-Manual

https://www.usa.canon.com/internet/portal/us/home/support/details/printers/color-laser/mf8580cdw/color-imageclass-mf8580cdw#boxcontents_supporttab_tab

https://www.manualslib.com/manual/89....html?page=604

As I said before, it's result 【 "Correction fail" after like 1 min】

[teckat]

Re: Colour Mismatch - Canon imageCLASS MF8580Cdw

As I said before, it's result 【 "Correction fail" after like 1 min】

If your registration is off, it will effect the calibration printout alignment. And as with the Laser alignment.
Causing a auto cal failure.
Happens on many iRC's an Advanced Color models.
Also will happen if some settings in service mode are changed.




http://support-th.canon-asia.com/contents/TH/EN/8201859200.html



NOTE

If the <Correction failed.> message is displayed

• Did you load plain or recycled A4 or Letter size paper in the paper drawer ?
• Did you place the adjustment image with the print side face down, with the black stripe toward the back side of the machine ?
• Has a paper jam occurred ?
• Is the amount of toner required for correction sufficient ?
• Is the transfer belt inside the machine dirty ?

[rubbishjason]

Re: Colour Mismatch - Canon imageCLASS MF8580Cdw

If your registration is off, it will effect the calibration printout alignment. And as with the Laser alignment.
Causing a auto cal failure.
Happens on many iRC's an Advanced Color models.
Also will happen if some settings in service mode are changed.




http://support-th.canon-asia.com/contents/TH/EN/8201859200.html



NOTE

If the <Correction failed.> message is displayed

• Did you load plain or recycled A4 or Letter size paper in the paper drawer ?
• Did you place the adjustment image with the print side face down, with the black stripe toward the back side of the machine ?
• Has a paper jam occurred ?
• Is the amount of toner required for correction sufficient ?
• Is the transfer belt inside the machine dirty ?

I had tried to replace all the toner this morning, and the "Correct Print Colour Mismatch" finally succeeded!
It turns out red mismatch is not only affected by the red toner
Thanks for your help

[teckat]

Re: Colour Mismatch - Canon imageCLASS MF8580Cdw

I had tried to replace all the toner this morning, and the "Correct Print Colour Mismatch" finally succeeded!
It turns out red mismatch is not only affected by the red toner
Thanks for your help

welcome and good luck