Canon ir7086 v1 finisher problem

[mramlawi]

Werid problems always happen with me im facing a jam on the swing guide ,the paper stopped and the swing guide didnt works (up and down) ,i wonder who can make it works , i changed main pcb of the finisher,motor, and the sawing guide all assembley tried it on other finisher it works , im dizzy honestly why its not workin . If any one can help

[vigour]

Re: Canon ir7086 v1 finisher problem

did you get any ecode
Did you change the whole process unit or just the swing guide.

[mramlawi]

Re: Canon ir7086 v1 finisher problem

No error code

[vigour]

Re: Canon ir7086 v1 finisher problem

you did not answer my other question.
anyhow, check your fuse pcb for a blown fuse.
check swing guide motor and sensor

[mramlawi]

Re: Canon ir7086 v1 finisher problem

you did not answer my other question.
anyhow, check your fuse pcb for a blown fuse.
check swing guide motor and sensor

i changed all the pcb"s and also the swing motor

[mramlawi]

Re: Canon ir7086 v1 finisher problem

Still the swing unit not rising and workin