Good day Sir, Can anybody have a service manual for Canon Inner Finisher - F1 for Adv2230 and encounter this Error E520? TIA
-
-
Re: Canon Inner Finisher - F1 E520
E520 0001 = Shift Motor fails to move from HP
At initial rotation, when the Motor rotates for specified period of time and cannot move from HP, it is detected as an error if the
same symptom occurs again after the first retry.
1. Check if the Motor (M4) Connector is physically removed.
2. Replace the Motor.
3. Check if the Shift Roller HP Sensor (S2) Connector is physically removed.
4. Replace the Shift Roller HP Sensor (S2).
E520 0002 = Shift Motor fails to return to HP
At initial rotation, when the Motor rotates for specified period of time and cannot return to HP, it is detected as an error if the
same symptom occurs again after the first retry.
1. Check if the Motor (M4) Connector is physically removed.
2. Replace the Motor.
3. Check if the Shift Roller HP Sensor (S2) Connector is physically removed.
4. Replace the Shift Roller HP Sensor (S2).
m4 shift motor.jpg
s2 shift hp sensor.jpg**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Re: Canon Inner Finisher - F1 E520
Thank you so much Sir...Comment
Comment