[Error Code] CANON IPF-8000S

[ivanusicnm@gmail.com]

Hi everyone,

today I replace a printhead on canon ipf 8000s. I follow the procedure, and almost near end, appears error E161-403E. Is this problem with the left printhead, or right one.

thk,

[guitar9199]

Re: CANON IPF-8000S

I believe the 403E error is the Left print head, but check your lines for air BEFORE replacing the print head. If there's air in the lines, replace the purge unit BEFORE replacing the print head.

If there's no air in the ink lines, you might be looking at a bad flex cable.

Good luck!

[ivanusicnm@gmail.com]

Re: CANON IPF-8000S

Hi everyone,

today I replace a printhead on canon ipf 8000s. I follow the procedure, and almost near end, appears error E161-403E. Is this problem with the left printhead, or right one.

thk,

hi,

before I replace printhead, appers mesage: execute printhead cleaning, if not ok, replace left printhead. Why during replacement appers this error.

[guitar9199]

Re: CANON IPF-8000S

Air in the lines is the most likely culprit.

Purge unit 1st.... then left printhead.