Canon ir7086 v1 finisher e566-8001

[mramlawi]

Dears ,

all werids problems happend with me , i have canon ir 7086 v1 finisher when i turned it on it gave me e 566-8001 , i made it limited function the machine works but the finisher didnt rotate at all just solonied works on limited function .

replaced : fuse board / main pcb, power supply , door switch , shift sensors ps7 and motor m6 as i rememberd
and still the error shown .:/

[vigour]

Re: Canon ir7086 v1 finisher e566-8001

Do a search on the forum for E566. There is lots of info there.

Check for a blown fuse on the MOTOR DRIVER

[rudysemira]

Re: Canon ir7086 v1 finisher e566-8001

Dears ,

all werids problems happend with me , i have canon ir 7086 v1 finisher when i turned it on it gave me e 566-8001 , i made it limited function the machine works but the finisher didnt rotate at all just solonied works on limited function .

replaced : fuse board / main pcb, power supply , door switch , shift sensors ps7 and motor m6 as i rememberd
and still the error shown .:/

check all photo interrupter that could be possible have foreign matters and clean it....

[Raoufselwaness]

Re: Canon ir7086 v1 finisher e566-8001

Check PS8 clean or replace
feed us back

[mramlawi]

Re: Canon ir7086 v1 finisher e566-8001

Check PS8 clean or replace
feed us back

Thanks will check it and tell u