IR ADV 8105 Pro is driving me crazy!!!

[tinnyjay]

Hello!
I got a problem when i print everything except scanned document.
I tried ufr2, pcl6, ps and everything else but still the same. When copy the image is perfect.
Changed primary charger corona and still no difference.
I had to format pc and reinstall windows(7 64bit) but the same. Had to upload original test and scanned test. The printed image is the same as original but faulty!
Please help me!
Ps. toner and parts are OEMs and printing scanned documents and text is perfect!
CANON imageRUNNER ADVANCE 8085, 8095, 8105 Series Service Manual.jpg20170112143846.jpg

[teckat]

Re: IR ADV 8105 Pro is driving me crazy!!!

Hello!
I got a problem when i print everything except scanned document.
I tried ufr2, pcl6, ps and everything else but still the same. When copy the image is perfect.
Changed primary charger corona and still no difference.
I had to format pc and reinstall windows(7 64bit) but the same. Had to upload original test and scanned test. The printed image is the same as original but faulty!
Please help me!
Ps. toner and parts are OEMs and printing scanned documents and text is perfect!
[ATTACH=CONFIG]35250[/ATTACH][ATTACH=CONFIG]35251[/ATTACH]

---

Remove those drivers completely.
Re install from here--
imageRUNNER ADVANCE 8105 PRO Support - Download Drivers, Software & Manuals

[tinnyjay]

Re: IR ADV 8105 Pro is driving me crazy!!!

---

Remove those drivers completely.
Re install from here--
imageRUNNER ADVANCE 8105 PRO Support - Download Drivers, Software & Manuals

After reinstalling Windows 7 i used this driver. Now i removed completely and installed again and the problem is still here.
There absolutely no difference!

[dan7777]

Re: IR ADV 8105 Pro is driving me crazy!!!

After reinstalling Windows 7 i used this driver. Now i removed completely and installed again and the problem is still here.
There absolutely no difference!

If it is PDF try print as image.

[teckat]

Re: IR ADV 8105 Pro is driving me crazy!!!

After reinstalling Windows 7 i used this driver. Now i removed completely and installed again and the problem is still here.
There absolutely no difference!

---

hook up a laptop and send over some prints to check ?

so anything you send from your PC to print on 8105 has this issue ??

[tinnyjay]

Re: IR ADV 8105 Pro is driving me crazy!!!

If it is PDF try print as image.

I tried...the same!

[tinnyjay]

Re: IR ADV 8105 Pro is driving me crazy!!!

---

hook up a laptop and send over some prints to check ?

so anything you send from your PC to print on 8105 has this issue ??

I printed from 3 different computers...no difference!
Except scanned pdf pages everything its completely wrong.

[teckat]

Re: IR ADV 8105 Pro is driving me crazy!!!

---

I printed from 3 different computers...no difference!
Except scanned pdf pages everything its completely wrong.

---

so in process of elimination

re-loaded drivers = same issue
tested from 3 different computers= same issue

magnifying-glass.jpg
u have an internal image processing issue on 8105


Main controller PCB 2

CPU: 400 MHz, Image control
Image processing (resolution conversion, image rotation, halftone process, scanner
image process, printer image process, compression/decompression, decoding, direct
mapping, image area determination, generation of histogram,Trimming,Masking) ,
USB(devise) control,I/F (Reader, Printer,FAX,HDD,Power supply)
================================================== ===================
DDR2-SDRAM 512 MB (standard) / clock frequency: 200MHz
Scanner image process, printer image process, resolution conversion, compression/
decompression, coding/decoding

DDR2-SDRAM 512 MB (Op) / clock frequency: 200MHz
Product name: Additional Memory Type B (512MB)
Rasterizing, rendering, resolution conversion, coding/decoding
Required when 600dpi color scanning (mode) is used

SRAM 16 Mbit
To save data in Settings/Registration Mode/ Service Mode and image data
management information in HDD

Lithium battery
(BAT1)
For SRAM backup, Life: approx. 10 years

[tinnyjay]

Re: IR ADV 8105 Pro is driving me crazy!!!

---

---

so in process of elimination

re-loaded drivers = same issue
tested from 3 different computers= same issue

[ATTACH=CONFIG]35268[/ATTACH]
u have an internal image processing issue on 8105


Main controller PCB 2

CPU: 400 MHz, Image control
Image processing (resolution conversion, image rotation, halftone process, scanner
image process, printer image process, compression/decompression, decoding, direct
mapping, image area determination, generation of histogram,Trimming,Masking) ,
USB(devise) control,I/F (Reader, Printer,FAX,HDD,Power supply)
================================================== ===================
DDR2-SDRAM 512 MB (standard) / clock frequency: 200MHz
Scanner image process, printer image process, resolution conversion, compression/
decompression, coding/decoding

DDR2-SDRAM 512 MB (Op) / clock frequency: 200MHz
Product name: Additional Memory Type B (512MB)
Rasterizing, rendering, resolution conversion, coding/decoding
Required when 600dpi color scanning (mode) is used

SRAM 16 Mbit
To save data in Settings/Registration Mode/ Service Mode and image data
management information in HDD

Lithium battery
(BAT1)
For SRAM backup, Life: approx. 10 years

Does that mean using a external controller fixes it?
What about firmware upgrade?

[teckat]

Re: IR ADV 8105 Pro is driving me crazy!!!

Does that mean using a external controller fixes it?
What about firmware upgrade?

---

if all glass copies are good
& all internal test prints are good


u could try a firmware update if needed or overwrite existing if same is available .

have u tried replacing Main Controller 2 ?

[Canuck]

Re: IR ADV 8105 Pro is driving me crazy!!!

Ram clears done yet? What does a Windows Test page look like? Backup the RAM in service mode,then clear it. Don't restore it yet. Test it. If no difference, restore the ram. If it fixed it, P Print, restore the RAM. If it messed up again,clear and install values from P Print

[tinnyjay]

Re: IR ADV 8105 Pro is driving me crazy!!!

---

if all glass copies are good
& all internal test prints are good


u could try a firmware update if needed or overwrite existing if same is available .

have u tried replacing Main Controller 2 ?

Copying, scanned pdf and internal prints are ok. I dont have firmware for reloding or upgrading

[teckat]

Re: IR ADV 8105 Pro is driving me crazy!!!

Copying, scanned pdf and internal prints are ok. I dont have firmware for reloding or upgrading

---

printer has no internet connection

It will be necessary to ensure that the correct Country / Area selection in service mode is correct for the location in which the CDS is being used.
Copier > Option > FNC-SW > Config

EXAMPLE PIC shows US english

Three Methods of using the CDS to Update Firmware Defined.

Question : What are the 3 methods for using the CDS to update Firmware and how does it work? Answer : Method 1: The technician is onsite, enters service mode on the copier, selects the updater and has the machine attach to the CDS where the firmware is brought to the machine and the technician may select a version to apply and manually install the firmware. Method 2 : The Dealer uses imageWARE Remote to connect to the device and schedule a time where the device will connect to the CDS to obtain Firmware. The Firmware will reside on the device until such time as a service technician visits the device and manually applies the Firmware. Method 3: The Dealer uses imageWARE Remote to connect to the device and schedule a time where the device will connect with CDS, obtain the firmware and apply it automatically without any intervention of a technician.

[tinnyjay]

Re: IR ADV 8105 Pro is driving me crazy!!!

---

printer has no internet connection

It will be necessary to ensure that the correct Country / Area selection in service mode is correct for the location in which the CDS is being used.
Copier > Option > FNC-SW > Config

EXAMPLE PIC shows US english

Three Methods of using the CDS to Update Firmware Defined.

Question : What are the 3 methods for using the CDS to update Firmware and how does it work? Answer : Method 1: The technician is onsite, enters service mode on the copier, selects the updater and has the machine attach to the CDS where the firmware is brought to the machine and the technician may select a version to apply and manually install the firmware. Method 2 : The Dealer uses imageWARE Remote to connect to the device and schedule a time where the device will connect to the CDS to obtain Firmware. The Firmware will reside on the device until such time as a service technician visits the device and manually applies the Firmware. Method 3: The Dealer uses imageWARE Remote to connect to the device and schedule a time where the device will connect with CDS, obtain the firmware and apply it automatically without any intervention of a technician.

Version is Congfig-NL-En.00.00 and the deal couldnt upgrade it.
I need help
Printer is connected to internet!

[tinnyjay]

Re: IR ADV 8105 Pro is driving me crazy!!!

Ram clears done yet? What does a Windows Test page look like? Backup the RAM in service mode,then clear it. Don't restore it yet. Test it. If no difference, restore the ram. If it fixed it, P Print, restore the RAM. If it messed up again,clear and install values from P Print

The logo of Windows in the upper side of page, looks like a weak shadow.