[Misc] Canon ImagePass-B1

[Machie]

Is there a master password for ImagePass-B1? I am trying to go to the setup but unfortunately that the language set in the ImagePass is German. I was able to go to Run Setup to initialised the unit to factory default and entered the password Fiery.1, but it seems that the previous user of the machine have changed the password. I would appreciate if somebody can help me to set the unit to factory default. Thanks a lot Guys.

[Herrmann]

Re: Canon ImagePass-B1

password.zip

Unzip this file, load it via Command Workstation into the "direct" Queue and it should print the PW in plain Text

[vishop]

Re: Canon ImagePass-B1

Hi Hermann, in the CWS, we need to log in first to the fiery right? Usually its Fiery.1, but in his case, he dont have this password, saying it was different. How would he be able to load or import the ps file you have sent?

[Herrmann]

Re: Canon ImagePass-B1

if I remember correctly, you dont need to sign in as administrator; you can work as normal operator. Open top left, then import, there you can assign the printer queue. You can also set you printer driver to "LPR" ans assign the printer queue there:

printer_queue.jpg

[teckat]

Re: Canon ImagePass-B1

Hi Hermann, in the CWS, we need to log in first to the fiery right? Usually its Fiery.1, but in his case, he dont have this password, saying it was different. How would he be able to load or import the ps file you have sent?

reload
B1 firmware

or

• Connect your PC to the same network as the imagePASS and open a Web browser
window.
• In the URL field of the browser, type the IP address or DNS name of the imagePASS,
and then press Enter.
The IP address is listed under the Network Setup section of the Configuration page.
• On the WebTools home page, click the Configure tab.
• Click the Launch Configure button. Type the Administrator password for the imagePASS,
and then click OK.
The default Administrator password is Fiery.1.
However, the network administrator may
have configured a new password for the imagePASS.
• Expand the Server item in the left panel and click Backup/Restore.
• Click Backup Fiery Settings. Enter a file name and a location for the settings file, and
then click Save.
• Close the browser window.

If you saved the imagePASS settings earlier and are ready to restore the settings to
the system:
• Connect your PC to the same network as the imagePASS, and open a Web browser
window.
• Type the IP address or DNS name of the imagePASS in the URL field, and press Enter.
• On the WebTools home page, click the Configure tab, and then click the Launch
Configure button.
Now Type Fiery.1 for the password, and click OK
• Expand the Server item in the left panel, and click Backup/Restore.
• Click Restore Fiery Settings. At the reboot warning, click OK. Then locate and select the
configuration file that you saved earlier, and click Open.
• Allow the imagePASS to reboot.