ir1435if

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ibrahimba
    Technician
    • Jun 2016
    • 10

    #1

    ir1435if

    I Installed new Canon IR 1435iF. Initialisation is passed OK. Coppying is working OK. Fax is working OK. When I tried install driver on PC (UFRII_Driver_V3000_32_64_EN_08) started problems.... IR1435IF is conected via USB. OS is Win 7 Pro-64bit. After 5-6 attempts is installed but scanner does not work. Wen i tried scanning on USB stick- NOT WORKING!! I tried all settings with LAN - nothing works!!?

    Please help!!!
  • dan7777
    Senior Tech

    500+ Posts
    • Dec 2012
    • 680

    #2
    Re: ir1435if

    Originally posted by Ibrahimba
    I Installed new Canon IR 1435iF. Initialisation is passed OK. Coppying is working OK. Fax is working OK. When I tried install driver on PC (UFRII_Driver_V3000_32_64_EN_08) started problems.... IR1435IF is conected via USB. OS is Win 7 Pro-64bit. After 5-6 attempts is installed but scanner does not work. Wen i tried scanning on USB stick- NOT WORKING!! I tried all settings with LAN - nothing works!!?

    Please help!!!
    Most of them will not scan USB (USB to computer) these days. There used to be a program you could use but I think that is obsolete. But it should scan to a USB thumb drive the settings are turned on to scan to USB. I only have one so I do not know a lot about these but see problems on Canon web site all the time. Put a switch and set it up with a network cable.

    Comment

    • guitar9199
      Service Manager

      Site Contributor
      1,000+ Posts
      • Sep 2016
      • 1100

      #3
      Re: ir1435if

      Completely uninstall the drivers and disconnect the device from the computer. Then, RE-Install the drivers, and wait for the installer package to tell you to plug in the USB cord. I've had USB printer installs go "Wonky" unless you let the installer tell you when it's ready for the device.

      Pull scan to PC isn't going to happen on this series. If the customer wants scan, you'll need to network the printer using a static IP address and use the "Send" feature.

      Good Luck.

      Comment

      Working...