Has anyone else had an issue with the feeder on the Adv4035 taking in more than 1 sheet at a time? Just replace the p/u, feed and sep pad but the copier still will take in too many sheets, it doesn't jam just passes 2 or 3 together and keeps going so the customer has to actually count the sheets to make sure it did the entire job......any ideas?
-
-
Re: Adv4035 feeder
Common issue with this series. There's an updated Sep pad material that a lot of techs have had good luck with. Part # FC5-4368-000 -
Re: Adv4035 feeder
Try the FM1-A719-000 sep pad. Comes with spring and surface is different. I just put one in yesterday. Had just rebuilt rollers and pad and only had 8% on pad. Feeds fine waiting to see if that took care of pulling in several sheets. Customer told me they made copies of originals to see if it was a paper problem and it still did it.Comment
-
Re: Adv4035 feeder
There is another one as well that comes with a spring and it has a small weight installed underneath the pad. Can't remember the part # for this..
I have had success with FL3-7878 though - it's a grittier surface and the grip-tape is a little thicker. Seems to work well.Comment
Comment