Canon IC D1550 How do I get into service mode-(Not in service manual)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rbazan
    Technician

    50+ Posts
    • Dec 2013
    • 70
    #1

    Canon IC D1550 How do I get into service mode-(Not in service manual)

    Can't find how to get into service mode in manual- is it on a certain page if not- does anyone know the procedure.

    Thanks.
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16092
      #2
      Re: Canon IC D1550 How do I get into service mode-(Not in service manual)

      Originally posted by rbazan
      Can't find how to get into service mode in manual- is it on a certain page if not- does anyone know the procedure.

      Thanks.


      Think it's��
      Press "Menu/Home Key"> then Press "#2", then press "#8", then press "Menu/Home Key"

      all single actions
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • rbazan
          Technician

          50+ Posts
          • Dec 2013
          • 70
          #3
          Re: Canon IC D1550 How do I get into service mode-(Not in service manual)

          Originally posted by teckat


          Think it's��
          Press "Menu/Home Key"> then Press "#2", then press "#8", then press "Menu/Home Key"

          all single actions
          I think I tried that-but I'll try it again.

            Comment

            • rbazan
              Technician

              50+ Posts
              • Dec 2013
              • 70
              #4
              Re: Canon IC D1550 How do I get into service mode-(Not in service manual)

              Yes. That worked. I must have pressed the 2 and 8 key at the same time, pressing them one by one got me in.
              I may have made that same mistake on a IC 1120 I was working on. Thanks.

                Comment

                • teckat
                  Field Supervisor

                  Site Contributor
                  10,000+ Posts
                  • Jan 2010
                  • 16092
                  #5
                  Re: Canon IC D1550 How do I get into service mode-(Not in service manual)

                  Originally posted by rbazan
                  Yes. That worked. I must have pressed the 2 and 8 key at the same time, pressing them one by one got me in.
                  I may have made that same mistake on a IC 1120 I was working on. Thanks.


                  Welcome 🍺
                  **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                    Comment

                    Previous template Next
                    Working...