[Misc] Help with iR-ADV 8205 toner marks

[QC91]

Hi, we have iR-ADV 8205 and just changed the cleaning web and now haveing small toner marks on pages I'm very new to Canon printers


Thanks

[teckat]

Re: Help with iR-ADV 8205 toner marks

Hi, we have iR-ADV 8205 and just changed the cleaning web and now haveing small toner marks on pages I'm very new to Canon printers


Thanks

Is issue on front or back of print _?


Did u check the fixing inlet guide

Check the ETB cleaning blade.

[QC91]

Re: Help with iR-ADV 8205 toner marks

Hi, Thanks here is photo it skips some pages the mark but will also show up on duplex printing I have not look at fixing inlet guide can that be cleaned with alcohol?

Thanks

IMG_20170215_144408.jpg

[teckat]

Re: Help with iR-ADV 8205 toner marks

Hi, Thanks here is photo it skips some pages the mark but will also show up on duplex printing I have not look at fixing inlet guide can that be cleaned with alcohol?

Thanks



[ATTACH=CONFIG]35676[/ATTACH]

On duplexes
Try this

Adjusting service mode copier>adjust>feed adjust>REG-DUP 2 from 0 to -35 .

[QC91]

Re: Help with iR-ADV 8205 toner marks

Thanks for all the help it also does on single sided printing it started right after we changed the cleaning web

[QC91]

Re: Help with iR-ADV 8205 toner marks

Thanks how can I get it to Service mode on 8205?

On duplexes
Try this

Adjusting service mode copier>adjust>feed adjust>REG-DUP 2 from 0 to -35 .

[teckat]

Re: Help with iR-ADV 8205 toner marks

Thanks how can I get it to Service mode on 8205?

To go to Service Mode Classic Level 1 follow the steps bellow:

1) Select Settings/Registration

2) Press 2 & 8 at the same time

3) Select Settings/Registration

To go to Service Mode level 2, go to Service Mode level 1 and then:

1) Select Settings/Registration.

2) Select 2.


Go to Service Mode follow the steps bellow:

1) Select Settings/Registration

2) Press 2 & 8 at the same time

3) Select Settings/Registration

4) Select Mode List

5) Select Copier

6) Select Option

7) Select FNC-SW

8) Highlight [Level 1] to toggle between level 1 and level 2.

[QC91]

Re: Help with iR-ADV 8205 toner marks

Thanks for the help

To go to Service Mode Classic Level 1 follow the steps bellow:

1) Select Settings/Registration

2) Press 2 & 8 at the same time

3) Select Settings/Registration

To go to Service Mode level 2, go to Service Mode level 1 and then:

1) Select Settings/Registration.

2) Select 2.


Go to Service Mode follow the steps bellow:

1) Select Settings/Registration

2) Press 2 & 8 at the same time

3) Select Settings/Registration

4) Select Mode List

5) Select Copier

6) Select Option

7) Select FNC-SW

8) Highlight [Level 1] to toggle between level 1 and level 2.