IRADVC2030 E733-0000

[RHodg57]

Getting this code on an IRADVC2030. I have tried the cable between the Main Controller 2 and the DC Controller. I tried the Main Controller 2 and the DC Controller and the low voltage power supply. I tried updating with override System Software. Still no luck.

I am going to try a different hard drive and see if that helps. Any other ideas on this?

Hard drive didn't help..

[teckat]

Re: IRADVC2030 E733-0000

Getting this code on an IRADVC2030. I have tried the cable between the Main Controller 2 and the DC Controller. I tried the Main Controller 2 and the DC Controller and the low voltage power supply. I tried updating with override System Software. Still no luck.

I am going to try a different hard drive and see if that helps. Any other ideas on this?

Hard drive didn't help..

---

Troubleshooting a PCB.

Start removing loads from the DC-Controller by disconnecting 1 connector at a time and powering on the machine to see if the symptom changes.

Try to isolate the path toward error on connector popping error