canon 3200

[Gary L]

miss reg color to color help thanks

[Luther]

Take out an clean the backside of the transfer belt and all the rollers, if you can replace it replace it but usually cleaning it works, the belt is slipping, hope this helps

[kajsa39]

miss reg.

Replace the ITBelt and clean all the rollers and bearings replace unit and do a full auto grad this will clear your miss reg.

[OtherTech]

if not right after cleaning, dcon clear will fix (do a p print first, reg settings change)

[Oze]

Do a search of these forums...this question has been asked AND answered dozens of times.
http://www.copytechnet.com/forums/ca...istration.html