Canon LBP5050

[Printmend]

Hi

I have a Canon LBP5050 color laser printer. Every time I go to print I get these error messages:
"Out-of-Register Colors Correction has not been performed. Perform calibration again".
I do it and then printer finish job. But when I want to print another job I get this message:
"Could not correctly set the Printing Position Adjustment for each of the toner cartridges. Cancel the jobs and then try to perform calibration again. To continue printing click [Resolve Error]".

Message on status tool asks to "calibrate & register colour but it fails to perform these tasks.
All new toners in the machine

[zoraldinho]

Re: Canon LBP5050

Original cartridges?
correct color alignment on configuration page?
Old transfer belt?

Clean sensors (SR10-SR11)

Capture.jpg

I bet on cartridge issue

[Printmend]

Re: Canon LBP5050

Hi Zoraldinho,

New Canon original cartridges installed so don't think it had anything to do with them..
Cleaned the sensors and it works

• 
  Thanks for your help
  
  
  
  
  

Original cartridges?
correct color alignment on configuration page?
Old transfer belt?

Clean sensors (SR10-SR11)

[ATTACH=CONFIG]36649[/ATTACH]

I bet on cartridge issue

[zoraldinho]

Re: Canon LBP5050

OEM is different story.





Any time.

[Nazgul]

Re: Canon LBP5050

Same problem here. I will try to clean the sensors and I will reply.

[zoraldinho]

Re: Canon LBP5050

Same problem here. I will try to clean the sensors and I will reply.

Thank you.