IRC3220 Error E0005F9-0002

[cweber0531]

Hey guys,

Having problems with a N2 finisher on a IRC3220. Keep getting code E0005F9-0002. Not sure if it is a motor error or what not. Any help would be appreciated.

Chet
North Shore Copier

[Paul 75]

0002 The front cover switch (MS2S) or
the delivery cover switch (MS3S)
is faulty.
The front cover switch is identified to be open for 1
sec or more after the start of initial rotation or of
printing in the host machine with any of the
following sensors identifying the cover to be closed:
- inlet cover sensor (PI9S)
- front cover open/closed sensor (PI2S)

- delivery cover sensor (PI3S)

Hope that helps!