[Error Code] canon ir 6075 Advance

[charles]

pls can anyone help me with this Error code. when I on the machine this Error shows Eooo350-0001 pls can anyone help

[apoxi]

Re: canon ir 6075 Advance

pls can anyone help me with this Error code. when I on the machine this Error shows Eooo350-0001 pls can anyone help

Try First Controller System Error Diagnosis 4-1) Turn ON the Main Power Supply Switch while pressing the numeric keys '2' and '4' simultaneously.

4-2) Keep pressing the numeric keys (for approx. 20 seconds) until the following screen appears on the Control Panel.


4-3) Diagnosis is completed in approx. 3 minutes and the result is displayed on the Control Panel.
4-4) When the diagnosis result is normal

OK.jpg


4-5) When an error is detected by diagnosis
Detailed information is displayed under the judgment result. In detailed information, the name of the test where an error was detected is indicated.
NG.jpg

The following screen is an enlarged view of the detailed information indicated above. Explanation of the detailed error information is described.

[charles]

Re: canon ir 6075 Advance

Try First Controller System Error Diagnosis 4-1) Turn ON the Main Power Supply Switch while pressing the numeric keys '2' and '4' simultaneously.

4-2) Keep pressing the numeric keys (for approx. 20 seconds) until the following screen appears on the Control Panel.


4-3) Diagnosis is completed in approx. 3 minutes and the result is displayed on the Control Panel.
4-4) When the diagnosis result is normal

[ATTACH=CONFIG]37201[/ATTACH]


4-5) When an error is detected by diagnosis
Detailed information is displayed under the judgment result. In detailed information, the name of the test where an error was detected is indicated.
[ATTACH=CONFIG]37202[/ATTACH]

The following screen is an enlarged view of the detailed information indicated above. Explanation of the detailed error information is described.

This the result boss

[charles]

Re: canon ir 6075 Advance

[QUOTE=charles;571066]This the result boss
(NG) : SN- 5 SM BUS SOC DIMM 1
(NO) : SN- 9 PCI CONFIGURATION PCI-BRIDGE
(NO) : SN- 16 JUST ROM READ
(NG) : SN- 17 FRAM
(NG) : SN- 19 GS

[apoxi]

Re: canon ir 6075 Advance

[QUOTE=charles;571068]

This the result boss
(NG) : SN- 5 SM BUS SOC DIMM 1
(NO) : SN- 9 PCI CONFIGURATION PCI-BRIDGE
(NO) : SN- 16 JUST ROM READ
(NG) : SN- 17 FRAM
(NG) : SN- 19 GS

• "no" means that optional PCBs are not mounted. When [no] is displayed although an optional PCB is mounted, it means that an error has been occurring.
• "NG" means that an error occurred to PCBs mounted as standard.

SN-5 SM BUS SOC DIMM1

Check an SM bus error in the Main Controller PCB 1 and SDRAM (M1) on the Main Controller PCB 2

Main Controller PCB 1 PCI Expansion PCB Main Controller PCB 2 SDRAM (M1) on Main Controller PCB 2

1. Check the connection of the Main Controller PCB 1, and the Main Controller PCB 2. 2. Check the installation of SDRAM (M1) on the Main Controller PCB 2. 3. Replace SDRAM (M1) on the Main Controller PCB 2. 4. Replace the Main Controller PCB 2. 5. Replace the Main Controller PCB 1.

SN-9 PCI Config PCI-Bridge

Check a PCI bus error between the Main Controller PCB 1 and the PCI Expansion PCB

Main Controller PCB 1 PCI Expansion PCB

1. Check the installation between the Main Controller PCB 1 and PCI Expansion PCB. 2. Replace PCI Expansion PCB. 3. Replace the Main Controller PCB 1. Supplementary Information: If the PCI Expansion PCB is not installed, [no] is displayed for the diagnosis result.

SN-16 JUST ROMREAD

Check On-board ROM on the Main Controller PCB 2

Main Controller PCB 2

It is always no indication. A result does not become NG

SN-17 FRAM

Check Main Controller PCB 2 and the connection of the memory PCB

Main Controller PCB 2 Memory PCB

1. Check the installation of Memory PCB on the Main Controller PCB 2. 2. Replace Memory PCB on the Main Controller PCB 2. 3. Replace the Main Controller PCB 2.

SN-19 GS

Check On-board BUS on the Main Controller PCB 2

Main Controller PCB 2

1. Replace the Main Controller PCB 2.

But, first check and clean all mamory on Main 1 and 2. Then Check all connectors.

[charles]

Re: canon ir 6075 Advance

[QUOTE=apoxi;571129]

• "no" means that optional PCBs are not mounted. When [no] is displayed although an optional PCB is mounted, it means that an error has been occurring.
• "NG" means that an error occurred to PCBs mounted as standard.

SN-5 SM BUS SOC DIMM1

Check an SM bus error in the Main Controller PCB 1 and SDRAM (M1) on the Main Controller PCB 2

Main Controller PCB 1 PCI Expansion PCB Main Controller PCB 2 SDRAM (M1) on Main Controller PCB 2

1. Check the connection of the Main Controller PCB 1, and the Main Controller PCB 2. 2. Check the installation of SDRAM (M1) on the Main Controller PCB 2. 3. Replace SDRAM (M1) on the Main Controller PCB 2. 4. Replace the Main Controller PCB 2. 5. Replace the Main Controller PCB 1.

SN-9 PCI Config PCI-Bridge

Check a PCI bus error between the Main Controller PCB 1 and the PCI Expansion PCB

Main Controller PCB 1 PCI Expansion PCB

1. Check the installation between the Main Controller PCB 1 and PCI Expansion PCB. 2. Replace PCI Expansion PCB. 3. Replace the Main Controller PCB 1. Supplementary Information: If the PCI Expansion PCB is not installed, [no] is displayed for the diagnosis result.

SN-16 JUST ROMREAD

Check On-board ROM on the Main Controller PCB 2

Main Controller PCB 2

It is always no indication. A result does not become NG

SN-17 FRAM

Check Main Controller PCB 2 and the connection of the memory PCB

Main Controller PCB 2 Memory PCB

1. Check the installation of Memory PCB on the Main Controller PCB 2. 2. Replace Memory PCB on the Main Controller PCB 2. 3. Replace the Main Controller PCB 2.

SN-19 GS

Check On-board BUS on the Main Controller PCB 2

Main Controller PCB 2

1. Replace the Main Controller PCB 2.

But, first check and clean all mamory on Main 1 and 2. Then Check all connectors.

Thx boss