ITB Lever broken IRc adv 5030 ?!?

[JPiek]

Hello Guys,

I've seen weird stuff broken on a printer, but....

Somebody tried fixing 'some kind of error' in a 5030, afterward the copy's where 'faint on the uperside'...

So i checked and thought it was a drumproblem (at 12% ?)
see attachment...
I opened the drumcompartment to have a look at the drum, and saw this (see picture)

I cannot rotate/lock the ITB....
I removed the ITB, lock system didn't work well, lubricated it, works better now, still can't lock the ITb.
I ordered the Lver, hop it will lock then.. If not, anybody an idea what might be blocking it ?

[dan7777]

Re: ITB Lever broken IRc adv 5030 ?!?

Hello Guys,

I've seen weird stuff broken on a printer, but....

Somebody tried fixing 'some kind of error' in a 5030, afterward the copy's where 'faint on the uperside'...

So i checked and thought it was a drumproblem (at 12% ?)
see attachment...
I opened the drumcompartment to have a look at the drum, and saw this (see picture)

I cannot rotate/lock the ITB....
I removed the ITB, lock system didn't work well, lubricated it, works better now, still can't lock the ITb.
I ordered the Lver, hop it will lock then.. If not, anybody an idea what might be blocking it ?

I saw that once. New handle fixed it. If it still is hard to turn look on the back of the shaft where the funny c-clip goes and make sure it is in correctly.

[JPiek]

Re: ITB Lever broken IRc adv 5030 ?!?

Ok, thanks, I'm waiting for the lever to come in, then i'll have a second look..

[JPiek]

Re: ITB Lever broken IRc adv 5030 ?!?

Yes, replacing the lever fixed it !