Canon IR 1022 light prints

[LTTP]

Client called to fix light printing on his machine, we replaced toner bootle and drum unit but still prints are dim.

I can see the bottle is spinning so its actuallyh feeding toner to the machine but, is there something im missing? other than the light printing theres no other defects, no lines or spots.

any ideas welcome.

[CS0523]

Re: Canon IR 1022 light prints

Did you change or test the developer unit?
Have you an example for us?

[LTTP]

Re: Canon IR 1022 light prints

Did you change or test the developer unit?
Have you an example for us?

[LTTP]

Re: Canon IR 1022 light prints

Went to site yesterday and after polishing the drum unit prints quality improved but still theres a white band on the left side of the page, attached a scan of an internal print.

Dev roller looks OK, my guess would be a blade but not sure.

[Phil B.]

Re: Canon IR 1022 light prints

Client called to fix light printing on his machine, we replaced toner bootle and drum unit but still prints are dim.

I can see the bottle is spinning so its actuallyh feeding toner to the machine but, is there something im missing? other than the light printing theres no other defects, no lines or spots.

any ideas welcome.

did you clean the laser glass? how does transfer roller look?

[LTTP]

Re: Canon IR 1022 light prints

did you clean the laser glass? how does transfer roller look?

https://www.youtube.com/watch?v=b0Y1lB1lDr4&vl=en

[Phil B.]

Re: Canon IR 1022 light prints

https://www.youtube.com/watch?v=b0Y1lB1lDr4&vl=en

you should be able to clean the glass from the cavity where drum goes... not sure on that model if there is a metal shutter or not... but look above the drum in that cavity