If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
How does one un-attach the finisher? The older ones you took the two screws on the back of top cover and opened up to unscrew the hold downs on the metal pariot beaks.
How does one un-attach the finisher? The older ones you took the two screws on the back of top cover and opened up to unscrew the hold downs on the metal pariot beaks.
Comment