[Misc] C1+ developer uneven desnity

[dragsprit]

i have a one color density problem.
only black color has dots on the print.
is there any way to fix without changing starter...
supplying toner via
IMG_5572.jpg

[zoraldinho]

Re: C1+ developer uneven desnity

If gradation and full calibration and other stuff did not help then probably not. It's look like pure starter in black developer.

Folow the procedure with new starter!


FUNCTION > INSTALL > AINR-OFF; then, enter '1' and press the OK key
Bk developing assembly: COPIER > FUNCTION > INSTALL > INISET-K


Execute the following Service Mode: COPIER > FUNCTION > MISC-P > P-PRINT; then, store the outputpapers. If there is any previous P-PRINT output, replace it with the new one.
Restart machine.

Escape the Service Mode and select User Mode > Auto Gradation Correction. Execute auto gradation correction(full adjust) according to the instruction on the display.