Staple finisher L1/iradv 7200

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • roho
    Senior Tech

    500+ Posts
    • Mar 2009
    • 844
    #1

    [Misc] Staple finisher L1/iradv 7200

    Have been getting complaints about intermittent dog ears on the back lead edge of the finisher. Usually doesn't jam but jam codes for the finisher are 1124. I have not seen it jam or dog ear paper, tried some settings in service mode to slow down the operation to see if that helped. Has anyone had issues with this before?
    Thanks in advance!
    Tags: dog, ear, finisher, jam, paper
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Staple finisher L1/iradv 7200

      Dog �� on paper size ??

      1124 Jam on the ADVANCE C7000 / C9000 Series

      Solution :

      The 1124 Jam Code does not exist in the current Service Manual. However, there is a technical publication TP10 202a.pdf that explains the 1124 Jam Code which relates to a Stationary Jam at the PI104 Delivery Sensor on the Staple / Booklet Finisher. In most cases, the 1124 jam has been known to occur if paper curling is detected and possible dog earing of the lead edge of the paper coming out of the finisher.

      Please perform the curl adjustment via the Paper Type Management Settings in User Mode.


      Note: Although the tech pub TP10 202a.pdf displays the 1124 jam solely for the Staple / Booklet Finisher B1, the same problem has been noted in the Staple / Booklet Finisher A1.

      See off noted above :-\
      Dropbox - 34083.pdf
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • roho
          Senior Tech

          500+ Posts
          • Mar 2009
          • 844
          #3
          Re: Staple finisher L1/iradv 7200

          Thanks, I was considering paper curl as the culprit as the weather here has changed dramatically, will be going back to the client for another issue as well as this one. Thanks again!

            Comment

            • dan7777
              Senior Tech

              500+ Posts
              • Dec 2012
              • 680
              #4
              Re: Staple finisher L1/iradv 7200

              Originally posted by roho
              Have been getting complaints about intermittent dog ears on the back lead edge of the finisher. Usually doesn't jam but jam codes for the finisher are 1124. I have not seen it jam or dog ear paper, tried some settings in service mode to slow down the operation to see if that helped. Has anyone had issues with this before?
              Thanks in advance!
              Replace the reverse delivery assembly. Sometimes I also replace the door with it. I have never seen why it does it other than wear on mylars and flags. If it is full page color and it jams we increase the lead edge void.

                Comment

                Previous template Next
                Working...