Turn off main switch with imagepress c 6010

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • khattab.al.masry
    Trusted Tech
    • Jan 2014
    • 212

    #1

    Turn off main switch with imagepress c 6010

    We faced problem when shutdown canon imagepress c 6010 after long press with the shutdown switch
    the following message appear.
    have anyone face like this problem?
    Thanks in advance.20180124_150158.jpg

    Sent from my SM-J700H using Tapatalk
  • Phil B.
    Field Supervisor

    10,000+ Posts
    • Jul 2016
    • 22798

    #2
    Re: Turn off main switch with imagepress c 6010

    Originally posted by khattab.al.masry
    We faced problem when shutdown canon imagepress c 6010 after long press with the shutdown switch
    the following message appear.
    have anyone face like this problem?
    Thanks in advance.[ATTACH]38677[/ATTACH]
    Sent from my SM-J700H using Tapatalk
    it's telling you to throw the main power switch

    Comment

    • khattab.al.masry
      Trusted Tech
      • Jan 2014
      • 212

      #3
      Re: Turn off main switch with imagepress c 6010

      Originally posted by Phil B.
      it's telling you to throw the main power switch
      Yes I know!
      My question is there any symptom to shutdown it automatic without press main power switch?

      Sent from my SM-J700H using Tapatalk

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: Turn off main switch with imagepress c 6010

        Originally posted by khattab.al.masry
        We faced problem when shutdown canon imagepress c 6010 after long press with the shutdown switch
        the following message appear.
        have anyone face like this problem?
        Thanks in advance.[ATTACH]38677[/ATTACH]

        Sent from my SM-J700H using Tapatalk



        In some cases, when the shutdown sequence is initiated the printer main switch will not turn off automatically.

        The printer will indicate on the display to "turn off the main power".
        Just like your posted picture.


        One Solution :

        in this case, it wasfound that one of the connectors between the power supply unit and the main unit was not plugged in and causing this issue. after reconnecting the connector, the printer would shutdown the main power automatically during the shutdown sequence.

        See pic link for connections.

        Dropbox - 83867_2.jpg
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • P4621
          Junior Member
          • Dec 2017
          • 5

          #5
          Re: Turn off main switch with imagepress c 6010

          I have 2 that do this. Black connector is plugged in. I think there is a service mode that does it, just not sure which one.

          Comment

          • zoraldinho
            teacher-guide-expert-guru

            Site Contributor
            5,000+ Posts
            • Mar 2008
            • 5015

            #6
            Re: Turn off main switch with imagepress c 6010

            - When turning OFF the main power switch, hold down the control panel power switch for 3 sec or more. By doing so, the shut-down sequence activates, and the
            main power will go off automatically.
            - Be sure to operate the main power switch while the execution/memory lamp is OFF.
            - Do not turn off the main power switch while downloading otherwise it may cause the machine failure.
            - If turning off the main power switch while the cassette heater switch/environment heater switch is activated, power is distributed to each heater.
            If it ain't broke, don't fix it
            A picture is worth a thousand words

            Comment

            • khattab.al.masry
              Trusted Tech
              • Jan 2014
              • 212

              #7
              Re: Turn off main switch with imagepress c 6010

              Originally posted by teckat



              In some cases, when the shutdown sequence is initiated the printer main switch will not turn off automatically.

              The printer will indicate on the display to "turn off the main power".
              Just like your posted picture.


              One Solution :

              in this case, it wasfound that one of the connectors between the power supply unit and the main unit was not plugged in and causing this issue. after reconnecting the connector, the printer would shutdown the main power automatically during the shutdown sequence.

              See pic link for connections.

              Dropbox - 83867_2.jpg
              Again and again thank you very very much MR:Teckat
              the issue solved according your advise.
              yes The cable was unplug.

              Sent from my SM-J700H using Tapatalk

              Comment

              • teckat
                Field Supervisor

                Site Contributor
                10,000+ Posts
                • Jan 2010
                • 16083

                #8
                Re: Turn off main switch with imagepress c 6010

                Originally posted by khattab.al.masry
                Again and again thank you very very much MR:Teckat
                the issue solved according your advise.
                yes The cable was unplug.

                Sent from my SM-J700H using Tapatalk

                Thanks_Pizza Man .jpgwelcome
                **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Working...