Hello,
We are having an issue with our binder. We recently replaced the S88E emitting sensor. We did the adjustment of the new sensor as per instructions on the service manual. The book making process stops at the part where the book should be dropped to the output tray. It stays at trimming unit gripped by stack delivery. There are no errors or jam codes popping on the main engine other than "Perfect Binder is processing" After a lengthy wait, we have to power cycle the binder so we can get the binded book dropped to the tray. I am willing to pay for someone that can help us fix this issue whether remotely or in person. We are located in North NJ.
Thanks and have a wonderful day all.
Sent from my iPhone using Tapatalk
We are having an issue with our binder. We recently replaced the S88E emitting sensor. We did the adjustment of the new sensor as per instructions on the service manual. The book making process stops at the part where the book should be dropped to the output tray. It stays at trimming unit gripped by stack delivery. There are no errors or jam codes popping on the main engine other than "Perfect Binder is processing" After a lengthy wait, we have to power cycle the binder so we can get the binded book dropped to the tray. I am willing to pay for someone that can help us fix this issue whether remotely or in person. We are located in North NJ.
Thanks and have a wonderful day all.
Sent from my iPhone using Tapatalk