IR 5065 Installation

[welnu]

hi could somebody pls help me to how the proper instalation of canon IR 5065 with finisher and printer kit, how to enter into the service mode and if I need to activate some data, software, auto toner adustment etc, I used to work with the old clc model; 300,350,1000,1050 , but wayback to yr 2000, so not really familiar with the new model, im new here and many thanks for assistance.

[Oze]

hi could somebody pls help me to how the proper instalation of canon IR 5065 with finisher and printer kit, how to enter into the service mode and if I need to activate some data, software, auto toner adustment etc, I used to work with the old clc model; 300,350,1000,1050 , but wayback to yr 2000, so not really familiar with the new model, im new here and many thanks for assistance.

If you can get a hold of the manual it contains all the installation instructions/run-up procedures.

[welnu]

If you can get a hold of the manual it contains all the installation instructions/run-up procedures.

hi oze thanks for the reply, yes of course i can do that if only i have the manulal but i dont have the copy, i've got a lot of manual of canon both digital and analog but wayback 2000 model and i think a little obsolete now compared to the new model, same with xerox, mita, and konicaminolta, used to work with those company and not a shop and willing to share some service or parts or theory manual in exchange, but i felt im not welcome to the community, thanks a lot anyway.