[Electrical] irac 5035 E0001-0000

[Jerrygbs]

I have a irac5035 with a e0001-0000 that I can't figure out. Replaced Fuser 3 times to be sure. Replaced DC controller UN1 2 times, Replaced UN6 2 times. The code resets everytime and the machine comes ready, after I push the start key the paper feeds to the 1st set of relay rollers after paper feed and the code kicks. Watching the thermistors in the service mode the temp goes up above 280 C . I'm out of ideas hoping someone has a clue to help. Thanks

[mosey1100]

Re: irac 5035 E0001-0000

I have a irac5035 with a e0001-0000 that I can't figure out. Replaced Fuser 3 times to be sure. Replaced DC controller UN1 2 times, Replaced UN6 2 times. The code resets everytime and the machine comes ready, after I push the start key the paper feeds to the 1st set of relay rollers after paper feed and the code kicks. Watching the thermistors in the service mode the temp goes up above 280 C . I'm out of ideas hoping someone has a clue to help. Thanks

You could try this.