iR3220 in ready cond. then looses power

[copierfixer]

iR3220 down when called in. No Power at all. Got it to power back up but won't stay up it will go back down as if someone unplugged it.
I have replaced Ac power supply and fuse assy on front of supply. Still shuts off. I have everything unplugged off the machine. no drawer ped. no d.f. no print no scanner I have everything off still goes down. I did get it to come up go to a ready state I made one copy then it crashed again and I haven't been able to return it since. powers up for maybe 30 sec.

....HELP!!!!

RB

[kuby]

Sounds like you my have a hard drive going bad.

[fixit]

3200

I agree, possibly hard drive but would reflash with latest firmware before replacing hard drive....is there a fiery attached?

[Oze]

Try powering up the machine with the fixing feeder draw out.
If it powers up and stays that way with the drawer out...slide the drawer back in and see what happens.
The connectors in the fuser have a bad habit of pulling down the 24v rails.

[copierfixer]

trying sub main and ram as per canon