AdvC5235A jam

[repeatcopiers]

I have a Service Manual for this AdvC5235A copier but not the Parts Manual. I'm getting jam codes 0001 and 0002 on the Image Reader F1 feeder. Manual says it is a Timing Sensor SR4 (Delay and Stationary). Can someone give me the part#.

Also, getting jam code 0213 - stationary vertical path sensor UN53. The flag right below the registration roller is occasionally puncturing a hole in the paper, does anyone know what could be causing that?

[teckat]

Re: AdvC5235A jam

WG8-5783-000
SENSOR SR4

Parts Catalog--Color Image Reader F1

https://www.google.com/url?sa=t&source=web&rct=j&url=http://technique.davin.be/files/Duplex-color-image-reader-unit-F1-G1-PC.pdf&ved=2ahUKEwi3x8vwwP_cAhXDUt8KHeFdD2cQFjADegQIBRAB&usg=AOvVaw2WP-lHusmtylLBE5bUDd4k

Check flag movement

[repeatcopiers]

Re: AdvC5235A jam

WG8-5783-000
SENSOR SR4

Parts Catalog--Color Image Reader F1

https://www.google.com/url?sa=t&source=web&rct=j&url=http://technique.davin.be/files/Duplex-color-image-reader-unit-F1-G1-PC.pdf&ved=2ahUKEwi3x8vwwP_cAhXDUt8KHeFdD2cQFjADegQIBRAB&usg=AOvVaw2WP-lHusmtylLBE5bUDd4k

Check flag movement

Thank you for the part# and manual for the feeder. The flag is moving freely, no sticky pads.

[teckat]

Re: AdvC5235A jam

Thank you for the part# and manual for the feeder. The flag is moving freely, no sticky pads.

check the paper guide position / check for tiny burs---
could cause paper to arc over flag