help !!! canon ir 2520 error E 000010
TKS
TKS
-
-
Re: canon
Try this........... or check the voltage input....
it does not work try to clear engine tru the service mode...
E010 0001 Title Unstable rotation of the Main Motor (M1) Description Detection is executed every 100 msec after the start of motor
rotation; however, the drive detection signal is absent for 2
sec.Remedy 1.Replace the Main Motor (M1).
2.Replace the DC Controller PCB (PCB4).E010 0002 Title Unstable rotation of the Main Motor (M1) Description During motor rotation, detection is executed every 100 msec;
however, the drive signal is absent 5 times in sequence.Remedy 1.Replace the Main Motor (M1).
2.Replace the DC Controller PCB (PCB4).
Comment