Ir2000 check printer cover

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • skippy22
    • Dec 2024
    #1

    [Misc] Ir2000 check printer cover

    I am working on a IR2000 wit a check printer cover error and am having a tuff time getting rid of it.
    Is there a way to find out which cover it is getting an error on?
    I am seeing no physical damages on any switches or any trash in them.
    Tags: check, cover, error, ir2000, printer
    • Phil B.
      Field Supervisor

      10,000+ Posts
      • Jul 2016
      • 22808
      #2
      Re: Ir2000 check printer cover

      Originally posted by skippy22
      I am working on a IR2000 wit a check printer cover error and am having a tuff time getting rid of it.
      Is there a way to find out which cover it is getting an error on?
      I am seeing no physical damages on any switches or any trash in them.
      did you run the door switch test in SM?

        Comment

        • skippy22
          #3
          Re: Ir2000 check printer cover

          Originally posted by Phil B.
          did you run the door switch test in SM?
          i could not find that option in service mode, or in my manual.

            Comment

            • zoraldinho
              teacher-guide-expert-guru

              Site Contributor
              2,500+ Posts
              • Mar 2008
              • 4955
              #4
              Re: Ir2000 check printer cover

              Open little lower door on the left side and close it little bit stronger.
              Practice makes perfect
              If it ain't broke, don't fix it
              A picture is worth a thousand words
              If you want something done right, you have to do it yourself

                Comment

                • roho
                  Senior Tech

                  500+ Posts
                  • Mar 2009
                  • 844
                  #5
                  Re: Ir2000 check printer cover

                  Service mode is a joke on this model. I would go checking for 24 volts, if that is interrupted you often get a message about a open door, as opening a door kills the 24 volts. Check around for 24 volts, likely missing somewhere.

                    Comment

                    • dan7777
                      Senior Tech

                      500+ Posts
                      • Dec 2012
                      • 680
                      #6
                      Re: Ir2000 check printer cover

                      Originally posted by skippy22
                      I am working on a IR2000 wit a check printer cover error and am having a tuff time getting rid of it.
                      Is there a way to find out which cover it is getting an error on?
                      I am seeing no physical damages on any switches or any trash in them.
                      It has been a while but if you have to pull a cover to get to the drum check in back where the arm makes contact with the switch. I had a couple of those. It could be that cover or the lower door. Usually the cover where you pull back to access drum. The metal arm/tab does not push on the switch. You just bend it so it does. I do not know of a way to find out which door. Old technology.

                        Comment

                        Previous template Next
                        Working...