Magenta Cross banding

[khattab.al.masry]

Dear colleagues:
we face problem with our imagepress c 7010 that while it print normally for time period good suddenly magenta bands in cross feed direction appear
The following procedures had taken:
1-replace magenta dev. Tank and starter
2-swap magenta laser unit with another
3-swap drum drive with another
4-refit drum delay port connection
The same issue without no result.

Sent from my SM-J700H using Tapatalk

[Phil B.]

Re: Magenta Cross banding

Dear colleagues:
we face problem with our imagepress c 7010 that while it print normally for time period good suddenly magenta bands in cross feed direction appear
The following procedures had taken:
1-replace magenta dev. Tank and starter
2-swap magenta laser unit with another
3-swap drum drive with another
4-refit drum delay port connection
The same issue without no result.

Sent from my SM-J700H using Tapatalk

Damn Man.. you've been around long enuff to know:
counts on parts
count on machine
any errors
did you calibrate new parts
PICTURES!!!!!!

[khattab.al.masry]

Re: Magenta Cross banding

[QUOTE=Phil B.;742364]Damn Man..
First:
did you curse me?
If yes please apologize about your bad behavior.
Second:
all procuders at install any spare parts are done
.3657_001.pdf

Sent from my SM-J700H using Tapatalk

[khattab.al.masry]

Re: Magenta Cross banding

Another samples

Sent from my SM-J700H using Tapatalk

[Phil B.]

Re: Magenta Cross banding

[QUOTE=khattab.al.masry;742372]

Damn Man..
First:
did you curse me?
If yes please apologize about your bad behavior.
Second:
all procuders at install any spare parts are done
.[ATTACH]42147[/ATTACH]

Sent from my SM-J700H using Tapatalk

1) apologize to someone that KNOWS (or should) know what information is needed to HELP YOU?
NOPE

2) last time I make an attempt to help you...
POOF

[khattab.al.masry]

Re: Magenta Cross banding

You called me by poof
Really you not respectable man Mr phil
Block!

Sent from my SM-J700H using Tapatalk

[nicknt82]

Re: Magenta Cross banding

Dear colleagues:
we face problem with our imagepress c 7010 that while it print normally for time period good suddenly magenta bands in cross feed direction appear
The following procedures had taken:
1-replace magenta dev. Tank and starter
2-swap magenta laser unit with another
3-swap drum drive with another
4-refit drum delay port connection
The same issue without no result.

Sent from my SM-J700H using Tapatalk

I think charging roller problem. check Drum life. swap magenta charge with another