If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I don't know if your issue is resolved now but I think it has to do with a blockage in the black hub unit. It is not supplying enough tonner into the developer to print strongly.
Remove the black hub unit to make sure there is no blockag. Also you for the mean time manually fill the developer unit with some of the tonner but it will fade again when it is used up.
Thanks guys for your reply I solved it and the problem was blockage in the black hub unit. It was not supplying enough tonner into the developer unit
Thanks, I'll have to look into that. My adjustments to the lower and upper limits did not work, I'm getting en error 20-0492, which is related to those readings.
Comment