Re: Which SMB version support by Canon C5200 series.
I have tried inside service mode, remote ui, admin mode.
None is working.
Which SMB version support by Canon C5200 series.
Collapse
X
-
Re: Which SMB version support by Canon C5200 series.
how'd you try?
Via Settings or Service Mode? Try to update the device in service mode.Leave a comment:
-
Re: Which SMB version support by Canon C5200 series.
But this IRAC5235i cannot even see the official release at all.Leave a comment:
-
Re: Which SMB version support by Canon C5200 series.
Hi denvertan
Strange combination of numbers.
With the MN-Cont 31 the dc con is the version 13 and not 8.
Try to install first the last official release, 56.08, and the retry to install this special version.
Leave a comment:
-
Re: Which SMB version support by Canon C5200 series.
This is the screen capture of the version for the copier.
Please have a look at the link below.
Canont SMB at all C5235i - Album on ImgurLeave a comment:
-
-
Re: Which SMB version support by Canon C5200 series.
No, for the 42XX you have another password:00006037
44648739
Leave a comment:
-
Re: Which SMB version support by Canon C5200 series.
, how about iradv4245?same special firmware password?
Leave a comment:
-
Re: Which SMB version support by Canon C5200 series.
which version is now on the device?Leave a comment:
-
-
Re: Which SMB version support by Canon C5200 series.
did you put zeroes in ID? it must be 00006721 and not 6721
it is a common mistakeLeave a comment:
-
Re: Which SMB version support by Canon C5200 series.
Tested the Commmunication Test. It shows all OK!
But when I try the Registration ID and Password for like 10 times. It always show "Registration ID and Password ERROP"
I have attached the CDS server hyperlink address. Any help will be much appreciated.
Screen captures:
Canon C5235i Firmware Update Failed. - Album on ImgurLeave a comment:
-
Re: Which SMB version support by Canon C5200 series.
Tested here with my 5235i and it works.
if you make a communicationstest, you get an error or ok?
if you get an error, check the logs.
this id and password is for all 52XX with and without "i"Last edited by disamm; 07-08-2019, 09:43 AM.Leave a comment:
-
Re: Which SMB version support by Canon C5200 series.
Found the firmware updater at service mode.
But when I input
Registration ID: 00006721
Password: 43149128
it give me error "Failed to retrive information of special firmware Check the registration ID and Password".
I double check again the paper service bulletin posted is for C5235 my copier is C5235i (with a "i") does it using different firmware from the one without "i" ?Leave a comment:
-
Re: Which SMB version support by Canon C5200 series.
System software cannot be installed via the RUI.
1. Via Settings/Registration --> but only standard version and updates
2. Via Service mode --> Standard and Special version, also Downgrade possible.Leave a comment:
Leave a comment: