reset counter to 0

[petermays]

Re: reset counter to 0

i have a easier way for you to get counter to 0

turn machine upside down and print.
your counter will then go backwards.

[giogi]

[Copier repairman]

Re: reset counter to 0

I am possible.
Write the F_RAM installation program to the counter board using the jig, put it in the machine, and enter the service mode. Clear MMI OK The total counter becomes "0".

[Phil B.]

Re: reset counter to 0

I am possible.
Write the F_RAM installation program to the counter board using the jig, put it in the machine, and enter the service mode. Clear MMI OK The total counter becomes "0".

I am possible.


maybe in YOUR country but in alot of the world IT IS ILLEGAL!

[Copier repairman]

Re: reset counter to 0

[QUOTE = 필 B.; 1052826] 가능합니다.


어쩌면 당신의 나라에 있지만 세계의 많은 곳에서 IT는 불법입니다! [/ QUOTE]

When you buy a new counter board from Canon, you have data on the new board.
Post-installation manuals are also included.

[arfanbutt]

Re: reset counter to 0

if you want all konica minolta with color press mfp and all mfp totel counter editer device we have all type of device contact me arfanpak444@gmail.com

[Copier repairman]

Re: reset counter to 0

Now I don't do this.

[zoraldinho]

Re: reset counter to 0

[QUOTE = 필 B.; 1052826] 가능합니다.


어쩌면 당신의 나라에 있지만 세계의 많은 곳에서 IT는 불법입니다! [/ QUOTE]

When you buy a new counter board from Canon, you have data on the new board.
Post-installation manuals are also included.

You cannot buy a counter pcb from Canon.
If you are an authorized Canon partner, you can order a new counter pcb, but it is empty and when you install it, it overwrites the existing counter from another pcb board.

[Gift]

Re: reset counter to 0

if you want all konica minolta with color press mfp and all mfp totel counter editer device we have all type of device contact me arfanpak444@gmail.com

flux.jpg

Got one too, working like a charme