If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Obstruction of the carriage / printing process. Check inside your printer through the gears that you can see under the lid. There should be something obstructing the gears such as dirt or small piece of paper. Check VERY thoroughly. Also - make sure all the ink tanks have ink (and are OEM). On some Canons, 5100 could also be you removed an empty tank and then put it back in. It may be wanting a new OEM tank.
Last edited by costd; 01-14-2009, 11:04 PM.
Reason: spelling error
Comment